Midnight Brewing Co

Pepper Beer

2011-04-12T12:31:00.006-04:00

It's time to brew something different. Something exciting. Something, dare I say... DANGEROUS! Okay maybe not dangerous (unless you choke on the beer... somehow), but still we are heading in a new direction here. What direction is that? Pepper beer. So crack open a homebrew and read on!

I recently went to the Extreme Beerfest here in Boston and it has gotten me thinking about brewing something bigger than your run of the mill stouts, IPAs, Pale Ales, etc. One of the best beers I had at the festival was easily a Sake-Beer from Cambridge Brewing Company. It was absolutely amazing. It had the sweet and floral flavors from the Sake but on top of the malty goodness of the underlying beer. Apparently CBC first brews the Sake and starts the fermentation process. Once fermentation has gained some momentum they brew the beer and dose in the wort to the fermenting Sake so that the two ferment together, driven by the Sake yeast. The process is complicated but the result is absolutely delicious! If you happen to live in the Boston area I highly recommend trying it out if they still have it.

But I digress. I just can't help talking about the Sake beer, it is that good. So pepper beer. There was at least one brewery with a pepper beer offering at the Extreme Beerfest but unfortunately it was a butterbomb with very high diacetyl. I felt like I was drinking room temp butter and if there was any pepper in there I certainly couldn't find it.

Fortunately, one of my homebrewers-in-training has a love of pepper beer that couldn't be diminished by a whole tub o' Land O' Lakes and so we are forging on to brew a pepper beer.

Considerations
1) What kind of pepper should we use? This depends on your goal. Are you trying to just get some extra bite with the hotness or are you also trying to get some pepper flavor? There is a great Chipotle Beer out there (The brewery escapes me) that not only has kick to it, but the smokiness that is characteristic of the Chipotle.

2) What will the malt base be? I have read about pepper beers built on porters, pale ales and amber ales. I like the idea of a porter base maybe with some addition of a small (VERY small) amount of smoked malt. I am hesitant to use a lighter beer as the base because I don't feel that there would be enough complexity in the maltiness to complement the spiciness of the pepper. However, I could be completely wrong and I would love to try a pepper beer built on pale malt to find out.

3) When should we add the pepper? There doesn't seem to be a consensus out there. Some people add during the boil and others to the primary or secondary as when fruiting a beer. I am not sure how volatile capsaicin (the chemical in peppers that produces the burning sensation) is so adding to the boil may not be the best. I think we are going to add it to the primary after the first few days of vigorous fermentation or maybe we will rack into a secondary over the peppers.

4) To roast or not to roast? On days where I have spare time for some legitimate cooking with a recipe involving red peppers, I occasionally like to roast the peppers myself in my oven. The change in flavor can be subtle or dramatic depending on how you roast, but I like the idea of opening up more flavor for the beer. We will probably roast our peppers ahead of time.

Alright reader(s), you have made it through another meandering post about beer that hasn't even been brewed yet! Congratulations. I suggest opening a homebrew as a reward for yourself and be sure to check back later for the results of the brew! Cheers!

Bitter Beaver IPA

2010-12-06T18:39:00.001-05:00

Okay, okay this post is a little later than it should have been after all the talk of "Midnight Brewing back online" but better late than never! If you have not done so already, crack open a homebrew and read on about the first weekend of brewing in almost a year.

We chose to brew an IPA about a month ago. Now with that first sentence I am sure you are thinking something like "Wait, wait, wait A Brewer. You distinctly said last time B Brewer had moved away so what is this 'We' you speak of?" A fair question. Well as it turns out there are other people here in business school that are interested in homebrewing but like most, have never taken that interest anywhere. Personally I can't let that stand. If I have the equipment and you have the interest then by god lets brew some beer! So the new "We" would be me and a group of 3 or four other (new) homebrewers. But I digress.

RECIPE
As I said we chose an IPA by popular vote. We aimed for a copper colored IPA with bitterness under 90 IBU. We weren't aiming for a West Coast IPA or East Coast IPA in particular though in general I prefer the citrusy West Coast flavor. Details:

8.5lbs 2-row
2lbs Crystal 40L
0.5lbs Vienna
1oz Nugget (Pellets) 60min
0.5oz Nugget (Pellets) 30min
1oz Cascade (Whole) 10min
1.5oz Nugget (Pellets) dry hop - 4 days

So it has been a long, long time since I have made an IPA so this is the rough beginnings of a new recipe. I am a little concerned about the effect on flavor and body of 2.5lbs of Crystal & Vienna, but on the other hand I am curious so why not try it. As far as the hops go, BrewPal says this should lead to about 66 IBU but this does not necessarily reflect the perceived bitterness. I try not to get too hung up on IBUs in general as I have had a 50IBU beer that tastes less bitter than a 23IBU beer due to the balance of malt flavor. So while IBUs are certainly a good indicator, it is not a guarantee of how bitter a beer will actually taste. Again, the best choice is to taste the beer we end up with and adjust for the next time.

THE RESULTS
I wrote the above portion of this post many moons ago when we actually brewed this batch and the beer has since fermented, been bottled and mostly consumed. This batch turned out absolutely delicious and I can't wait to make another batch. It is a bit thicker than I expected, but I think that the mouthfeel fits well with the overall beer experience. As I expected the perception of actual bitterness is not up there, but it is definitely in IPA territory. The malt and the body of the beer balance the bitterness very well and make for an extremely drinkable beer. As for color, it is a deep copper with a decent straw colored head. The aroma of the nugget hops really comes through as soon as you pour yourself a glass and people that have sampled it have said they expect it to be very bitter from the aroma but are pleasantly surprised. If you love IPAs and have a friend who you want to get hooked as well I think this would make a great "gateway" IPA. It is bitter, but balances so well that the newbies will not run in fear at the first sip.

A great comparison to this beer would be to Troegs Nugget Nectar. If you are on the east coast and have the opportunity to try Nugget Nectar I highly recommend this IPA. If you like Nugget Nectar then by all means try out this recipe.

A few other notes: Our efficiency was pretty abysmal at 62%, but there were some issues I will go into in another post about the current equipment situation. The final abv was 4.5% which is respectable enough for me though could be higher if we can achieve better efficiency. Overall though I am very happy with this beer and can't wait to brew it again. We just bottled a Spiced Holiday Ale so I will try and throw up that recipe soon. If you haven't brewed your holiday beer at this point though it is not likely to be ready by Christmas.

You have made it through another post fair readers so why not congratulate yourself and crack open a homebrew! Cheers!

MBC Back Online!

2010-10-19T09:01:00.004-04:00

Dearest Reader(s),

It has been awhile. Nearly two years since we have spoken. Things have changed quite a bit here at Midnight Brewing. B Brewer has moved on to the Maryland area (with half the MBC equipment) and I am now in the Boston area. I can count on one hand the number of times I have brewed this year and obviously I have written nothing about those few brews. For that I am sorry.

But fear not! I have since purchased a new kettle, fermenter and false bottom (more on this later) and brewing is going to start up again. Of course since I am in Boston this means that Midnight Brewing is located in Boston (not Maryland B Brewer sorry). I plan on brewing this weekend. And next weekend. And the following weekend. Not only that but *Gasp* I will probably write about the new adventures of Midnight Brewing here for your reading pleasure!

Just to give you a preview, this weekend will be the first time use of the false bottom. Up until now we have always used a braided hose in our lauter tun (Round drink cooler) which has had its fair share of problems. So hopefully from this weekend I can lay down some fresh lautering wisdom. I have also met some Boston homebrewers that work with 15 gallon batches (brewed indoors no less) that I would like to profile at some point.

So there you have it readers. Midnight Brewing is back and beer will be on tap (in bottle?) soon! So relax, breathe easy and why not pop open a homebrew to celebrate!

VLB

2009-01-25T14:28:00.002-05:00

I had mentioned some time ago that I would be going to Versuchs- und Lehranstalt fur Brauerei in Berlin and that I was planning on keeping a blog of my experiences. For any who are interested in my meandering thoughts about the brewing school as well as what it's been like living in Berlin take a look.

Off to Brew School

2008-11-16T00:41:00.003-05:00

I have good news and bad news fair readers. Bad news first? Well there may be a slow down in the blog postings. Whats that you say? We take forever to post anything new anyway? Well I wouldn't say forever, but it looks like things might slow down a bit more, which brings us to the good news. I am going to be heading off to Germany to attend the 2009 Brewmaster program at Versuchs- und Lehranstalt für Brauerei in Berlin (VLB).

The course is going to start January 5th 2009, but we may not be able to do much brewing between now and then since I am going to be focusing on packing up my life in Rochester (And if we did brew would there be enough time for me to enjoy any of it?).

I hope to do two things for you readers though. #1 Discuss why I chose to go to VLB over other programs such as the one at UC Davis or the World Brewing Academy through the Siebel Institute of Technology. #2 Start a blog about my experience in the program should anyone want to read about it.

In any case that's whats to come for Midnight Brewing Co. That was probably as tiring reading as it was writing so why don't you crack open a homebrew. Cheers!

Tasting the Pumpkin

2008-10-21T11:36:00.000-04:00

Back for your reading pleasure are some tasting notes on the pumpkin ale. It’s been three weeks since we bottled the beer and I have cracked open several in just the past week. The beer is a dark amber color about 14 Lovibond. It has enough cloudiness to it that you can’t see completely through it but it is not so cloudy as a unfiltered wheat.

The body is not exactly what I had hoped. Granted the idea is to avoid getting a beer with the thickness of pumpkin pie but at the same time a beer of this style should have more body to it than water which is what we ended up with. Had we not had so many problems with the mash as you may have read in the last post, I am sure the body would have been thicker and more on target.

The flavor is pretty much what we were shooting for. Remember, the idea is to get most of your flavors from the spices you add, not necessarily from the pumpkin itself. After all, have you ever eaten plain pumpkin before it gets made into pie? It’s not a bad flavor but it is not what is going to make your beer stand out. We ended up with a subtle blend of spices so you can definitely get the impression of pumpkin pie but it is not as strong as actual pie. Why is this good? Well you want to be able to drink more than one of these in a sitting and if the spice come off as too strong I would be more likely to drink just one before switching to a lighter brew.

This all comes together to an excellent beer for the fall and on into Halloween. If you haven’t tried making one in time for this Halloween nothing says you can’t just make one now especially as there are plenty of real pumpkins to be found. If you do want to make a pumpkin ale of your own, be sure to read our other posts here about our experience making it to avoid some of the troubles we have had.

On that note, crack open a homebrew and enjoy the fall! Cheers!

Also, be sure to vote in the upcoming election and once you do, open up another homebrew as a reward for being a good citizen!

On Pumpkin Ale and Stuck Sparge

2008-08-29T10:10:00.004-04:00

Here begins the next part of the Pumpkin Ale saga. So we brewed last weekend (read: I wrote this post three weeks ago and didn't finish it till now) and it went… as it normally does with screw ups and hang-ups. Here is a brief summary of the ingredients (sans hops which I can't find the list of right now):

5lbs canned pumpkin (roasted 1hr on a baking sheet)
lager malt
Crystal malt
Ginger
Cinnamon
Allspice

We use lager malt because the pumpkin is going to add a lot of body to the beer and had we used our regular base malt of 2-row barley it could have resulted in an overly thick beer. The idea is to get some of the flavors of pumpkin pie not to make it as thick as pumpkin pie. As for the spices I will leave that up to your own personal taste. This is the blend we used last time and it turned out well. Other brewers will leave out the ginger or will add spices like cardamom, but again it’s personal taste.

The hop choice comes mainly out of availability. This is a completely different hop blend than we used last time but our LHBS was out of every variety of hops we used previously with the exception of Willamette.

We roasted the pumpkin for one hour in the oven on a baking sheet. After roasting we added the pumpkin to the mash after 30 minutes. It smelled delicious.

The mash went well until it came time for lautering and sparging. Our mash tun setup consists of a metal braid in the bottom of our converted cooler which can lead to some issues. I am talking issues like the kind an old man with an enlarged prostate gets. Weak stream. On the lighter beers such as pale ale or IPA this is never a problem, but with the pumpkin or stout it becomes a problem. The pumpkin makes the wort extremely thick even after the addition of hot water for the mashout and the flow of wort slows to a mere trickle. Not to worry though. Having faced this exact situation in the past we have come up with a surefire remedy. Make a mess. A huge mess. More on this later.

The first step once our sparge was clearly stuck was to try and stir things up a bit with our paddle. Hopefully this would blend the cement like mixture enough to allow the wort to flow again. However, the downside was that it disturbed our grain bed which had given us nice clear wort up until this point. It got to be so that we had to stir every minute or so in order to continue even a modest flow of the now cloudy wort. Then came our next brilliant plan.

We found our solution in a grain bag left over from our time before the mash tun. So with great care taken to spill as much wort as possible over ourselves (hot wort, very hot wort…) we transferred the mess of pumpkin, grains and wort to another container, placed the grain bag inside our mash tun and then promptly transferred the mess back and into the grain bag. Messy enough? Not by Midnight standards. What followed was a steady process of pouring more sparge water over the grains and then as the flow out of the mash tun slowed we would pull the entire grain bag out of the mash tun to get the flow going again. Two things I should point out here: #1 The grain bag is also very hot, as in 170° F hot so whoever lifts it is getting a little burned. #2 All the grains plus pumpkin plus all the water it was holding is not only heavy, but the bagged mass has swollen to fill the whole mash tun, sealing itself in. The result is that pulling this out is like trying to pull the sword from the stone... with no arms.

In the end it worked. We had somewhat cloudy wort for our boil but hopefully we didn’t pull too many tannins into our finished beer.

Lessons for those who may try this:
#1 If you are using the El Cheapo mash tun as we were with the plumbing braid in the cooler, you are in for some trouble. The pumpkin comes out of the can as a paste and when you add this to your mash it creates a mixture with the consistency of fresh cement. I would suggest either upgrading your mash tun as we will or perhaps adding the pumpkin to your primary or secondary. This will open you up to the possibility of some contamination so be careful.
#2 It is a good idea to rack this brew into a secondary and let it condition and clarify. We had a very cloudy brew and one week in the primary didn't clarify it quite enough.
#3 Should you attempt this recipe have some homebrews on hand. I would suggest one case worth at a minimum. Let me tell you this would have REALLY eased the stress of trying to get this brew moving faster than a turtle... a 100 year old turtle... also the turtle is dead.

All jokes aside it was nonetheless fun as always and the brew should turn out delicious. On that note, crack open a homebrew of your own for you have made it through another of my blathering blog posts. Cheers!

Pumpkin Ale

2008-08-04T12:55:00.003-04:00

October. It’s coming. Now we at Midnight Brewing Co don’t usually think so far into the future which is why our Christmas beer tastes best in March and our summer beers are best in the fall. However, from this point forward things will be different. As you can see from the title I am pondering our pumpkin ale.

Ideally it should be brewed so that it is ready for drinking enjoyment during the Halloween to Thanksgiving period. Last year was the first time we tried making a pumpkin beer and it actually turned out very well. However, we were restricted by the supply of fresh pumpkins which didn’t allow us to get our hands on pumpkin until early October.

So that means this time we are going to try something different. Most likely we will try pumpkin from a can and see how that goes. There is a bit of dissent within the staff of Midnight Brewing as to using anything but fresh, real pumpkin but we don’t really have much of a choice. To be safe though I would like to brew a second batch of the original recipe once we can get some fresh pumpkin.

One note on using actual pumpkin is that most recipes I have seen just require steaming/boiling of the pumpkin before using it in your brew. This will soften your pumpkin and make it easier to extract sugars and pumpkin flavors. However, what we did last year was to take our whole pumpkin, quarter it and then lightly roast it in the oven like when roasting red peppers. I don’t know whether or not roasting vs steaming/boiling makes a huge difference, but I think the caramelization from the roasting gives a richer flavor than merely steaming/boiling.

In any case, that’s what’s coming up so stay tuned and crack open a homebrew. Cheers!

Flour City Brewer's Festival

2008-08-01T10:47:00.006-04:00

To all those readers within convenient driving distance of Rochester, clear your calendars on the 15th of August between the hours of 6pm and 10pm. The Flour City Brewer's Festival is coming to Rochester. Although nowhere near as large as most other beer festivals (27 breweries participating) it is nonetheless a great opportunity to try a wide variety of beers on the cheap. The $25 admission includes a tasting glass, unlimited samplings and a good time (Not that kind of good time!). I plan on actually taking some notes this year to get some ideas for new Midnight Brews. See you there?

Smoked Results

2008-08-01T10:46:00.000-04:00

So it has been awhile since either of us has made a post. Be it lack of material (potentially), Godzilla taking a break from Japan to rampage through Rochester, NY (also likely) or perhaps sheer laziness (Do I need to even say?), we have been away from the blog for far too long. Apologies.

So without further ado a few words on the tasting of our recent experimental brew which was a smoked beer. The Rauchbiers that I have tried have always been darker, with a body about the consistency of milk. As a side note, when I talk about the body of a beer my range usually covers comparing to water, skim milk, 2% milk and cream. But I digress. One particular German Rauchbier most definitely tasted intensely like bacon. Although the beer was very much unique and interesting, I was not such a fan of drinking a beer that is would probably fit in well with your morning scrambled eggs and toast. We were basically looking to make a lighter beer that still had some smokey goodness to it.

Originally we were going to use a combination of wheat and 2-row as our base malt and then throw in a pound or so of the smoked malt. This would hopefully give us a beer with the flavors of a light wheat to balance out the smokeyness that can at times be overwhelming (read my beer tastes like the bacon I had for breakfast). Unfortunately our LHBS was out of the 10-lb bags of wheat so we were forced to choose between a pilsner malt and a lager malt. This could be where things went a bit… awry.

The beer I tasted the other day wasn’t bad per se. It had a lighter smokey character than the bacon beer, it wasn’t quite so dark and the body was light as well. Very light. Like water light. The beer was drinkable, unlike our attempt at raspberry wheat (RIP), but it did not have the body to match to the smoke. All in all it did not come together very well. To improve we definitely need to try using the wheat malt to give it more body and then go from there.
In any case, if at first you don’t succeed, try, try, try, try, try again. Cheers!

Mega Brewing Company

2008-07-14T10:05:00.003-04:00

Well it looks like the deal finally went through. Europe's InBev is buying Anheuser-Busch for $52 Billion. Not that I am necessarily a fan of their products but I am a little disappointed to see a major American beer brand fall to Europe. From this comes the world's largest brewer, Anheuser-Busch InBev. I wonder if this will change anything.

Brewer in the Dark

2008-07-04T11:38:00.004-04:00

I had planned on making a post this week about the Smoked Wheat that was recently bottled when I ran into a problem. Although not really a brewing related problem per se, it makes talking about the Smoked Wheat difficult. You see when I came home from work on monday to my new apartment that I just moved into none of the lights would turn on, clocks were off and it was basically dark. Yes the power company shut off the electricity to my apartment. Apparently the previous tenant had the power scheduled to be turned off early but didn't really let me know.

In any case, this means that the Smoked Wheats that I had tossed into the fridge were nice and toasty warm. Between you and me, I don't think tasting a warm beer is going to give me a very accurate impression of how it turned out... at all.

So until my electricity is turned back on this weekend I have nothing new for you readers. As for B brewer, he is currently gallivanting around Austria and Hungary. Hopefully he will have some brewery notes to share with us all when he gets back! In the meantime, crack open a cold homebrew and enjoy this Independence Day. Cheers!

Smoked Wheat

2008-06-12T18:26:00.012-04:00

Last weekend was a Bottle/Brew Day and a long one at that (8+ hours).

Looking to further experiment/refine our beer we decided to add a new element to our wheat beer, smoked malt.

One might say this would be an interesting addition, but being home brewers (why else would you read this?) you know no fear for new ingredients. We here at Midnight Brewing on the other hand are haunted by such beers such as the scotch ale that tasted like it was brewed by DuPont and the infamous Raspberry wheat that still lurks behind every corner. (I am not kidding, this beer has followed me through 2 moves! I think A Brewer is dropping them off at my place whenever he comes by, but thats for another post).

We have always talked about making a rauch beer, but have yet to commit the $$ for such an experiment. This seemed like a good transition brew to understand the power of the smoke.

A Brewer thought it might be a good idea to smoke our own, but that was shot down by me after I found some smoked malt at our LHBS. Who knows, if this comes out good we will probably experiment with smoking our own someday to get some unique flavors.

Preliminary tests of the smoked malt showed that it actually brought out the orange peel in our other wheat beer that we bottled the same day. So we forged ahead and brewed 'er up.

We decided on Fuggles and Willamette on this brew to try to accentuate the "woodiness" of the smoked malt. Results in coming weeks.

Other highlights:

New attachment for the wort chiller:
My Dad (fellow Homebrewer) took an interest in the efficiency of our chiller and picked up some new adapters that got rid of the annoying leak that our old attachment had. We actually timed our chill and it hit 80F in just under an hour. Anyone have any suggestions? I have heard of people chilling in 15 min before. I think the diameter of our copper tubing could be increased. Next brew we are going to actually do a curve of our chilling and post it here.

Midnight Brewing First:
We actually named one of our beers! The Belgian Whit that we bottled was christened "Fuzzy Logic". This was after many hours of research of Belgium on Wikipedia and fun with babel translation. Anyone know who Clovis is? Anyways since we still don't have labels for any of our brews yet, so we must resort to the 'ol sharpie on the cap trick to distinguish between brews. So I got a case of Florida (FL) beer in my basement...ok I tried

Mystery Solved:
We determined why our first experiment in fermentation (wine making) went south after retrying some pH paper on our latest brew. Turns out A Brewer forgot how the pH scale works, extremely acidic is not 14... not to mention that we both have at least 3 years of chem courses under our belt...sigh...I think some beverages might have been involved in this confusion...

Does this look like its above or below 7?

Fermenter repaired:
The last few brews have been scary, as we have been relying on a sub par airlock after our rubber o-ring gave out on us a few brews back. We finally repaired this with some caulk.

And for your viewing pleasure:

A Brewer and B Brewer cooling the wort. Note, recycling of water, which I spent 30 min dispensing over my garden. Note 2: Kalik and Guiness T-shirts! you would think we actually liked beer!

New Blogs

2008-06-05T23:34:00.002-04:00

Added a few more blogs over on the right. Your right not mine. Check 'em out.

Build a Better Wort Chiller

2008-06-05T17:07:00.004-04:00

So we finally enhanced the wort chiller several weeks ago, but there hasn’t been anything posted (read: I am lazy). The wait is over friends because here you have it our wonderfully more efficient wort chiller!

To review: Our immersion wort chiller is not particularly efficient because the coils of copper tubing end up just piling on top of each other in the bottom of the kettle like a slinky. To fix this we decided to get some heavy duty copper wire and weave it in and out between the twists of the tubing in order to hold the coils apart. That way we could actually get some cooling at the level of the wort near the top of the kettle where it is hottest (Heat rises…).

To get supplies I made a stop over at Home Depot which I would say is the store we visit second most after our homebrew shop. I have always thought that one of the most fun parts of homebrewing is cobbling random hardware together into workable equipment. Originally I had thought that 12ft of wire was going to be more than enough to make about three separate columns of wire up and down the chiller. In the end we only had enough to do it twice. This wire is 12 gauge insulated copper wire, that we stripped. As far as wire stripping is concerned, you should be sure you have wire strippers ahead of time because stripping 12 feet of wire with a box cutter is not fun. At all. I am talking blisters.

In any case, after we finished it turns out that we had made it about three or four inches too tall so I would suggest you take the time to measure out the normal height of the hot wort in your kettle and build your chiller from there. We on the other hand, prefer the ass backwards way of making the chiller, finding out it’s too tall and then bending the topmost weaves to compact the whole structure while it is sitting in near boiling wort burning our fingers. Yes, we went to college.

It works much better now than it used to. Note that you want the cooling water to enter the topmost coils and go through the bottom coils last (Again, heat rises…). We cut the cooling time to go from a boil to pitching temperature by about fifteen to twenty minutes.

There you go readers, you have finally gotten some useful information from us! Today we are bottling the Belgian (Not named yet but trying to avoid going with 2.0 on this one as with the stout) so hopefully get some notes about that up later. Cheers!

DISASTER in NY!

2008-05-30T11:00:00.004-04:00

Update Below 3:30pm

Catastrophe struck F.X. Matt Brewing Co of Utica NY when a fire decimated the brewery. For those not familiar with it, the family run brewery makes the Saranac line of beers, found in bottles, many bars and in my fridge. They are one of our favorite regional breweries with unique brews like their pomegranate wheat.

The blaze began Thursday evening, potentially from welding work. After fighting the fire for 14 ½ hours the fire was declared under control this morning, though the fire department will continue to put out hotspots. Estimated loss at this point is $10 to $20 million. Read more here.

Truly a tragedy, our thoughts and prayers go out to the family and staff of F.X. Matt Brewing. Although it will probably not happen soon, we certainly hope they will be able to recover from this disaster so we will be able to continue to enjoy their delicious brews. Best of luck guys.

UPDATE: BEER SUPPLY UNAFFECTED! The damage to the brewery was almost entirely to the canning and packaging area. The bottling operation looks to be salvageable. Fermenting, aging and kegging were unaffected so the brewery will still be producing beer and likely outsource the canning side of the operation.

This is one thing I think is so great about brewing, the camaraderie. People help each other in the brewing field, whether it be craft breweries or homebrewers. Several breweries have already offered to give F.X. Matt Brewing help in covering the side of their operation that was lost in the fire giving them the option of loading the beer into tankers and shipping it to other breweries for canning.

Well that’s the end of my ramblings. Kick back, relax, and enjoy your Friday with a Saranac (or other F.X. Matt Brewing Co beer). Cheers!

Wishlist

2008-05-23T11:45:00.004-04:00

After pawing through the blogs of the usual suspects (Monday Night Brewing, CNY Brew & Bearded Brewer) I found myself a bit envious. Not to say our operation is by any means pitiful but we are like the Oliver Twist of brewing equipment. Please sir, I want some more! So I came up with a wish list of what I would like to someday acquire for Midnight Brewing.

1) Electronic scale
2) Aeration stone w/pump
3) Plate Chiller
4) 100qt cooler converted to mashtun
5) Larger Kettle or another kettle plus additional propane burner
6) Keg + draft equipment
7) Steel conical fermenator (7gal if not larger)
8) Temperature controlled place for fermenator (converted fridge or build an insulated box)

So everything is kind of ordered from most feasible to least feasible. It is a wish list though so ideally money is going to drop from the sky and presto we bag the whole list in one go. Any other suggestions? If you suddenly had lets say $1000 for brewing equipment what would you do? In the meantime, homebrew, crack one open. Cheers!

PS. Tasting notes on Stout v3.0 and brewing notes on our Belgian to follow!

False Bottom?

2008-05-04T23:36:00.006-04:00

As you read last week we ordered a false bottom so I thought it was time to make a post talking about our trial run with the new piece of equipment. So without further ado if you would take a look at the picture below you will see.... a shoe.... in a box. Clearly this is not a false bottom, unless you count how the sole of my shoe is falling off. Needless to say the false bottom has yet to show up leaving us brewless for the moment. Fear not, though, for hopefully it will arrive within the week and by this weekend we will be in full gear to brew!

Stout v3.0 should be ready to drink soon as well! More on that later.

So I propose a toast! Raise your homebrews to the... shoe... in a box... Cheers!

UPDATE: Disaster!!! After writing this post I happened to check the ol' email and found a message buried in with the spam from Mountain Homebrew. It seems this particular false bottom is unavailable from the manufacturer until further notice! Of course that can mean only one thing. There will only be a shoe in a box, nothing more. We will be looking for another place to get the false bottom (or perhaps just make one).

Equipment Update

2008-04-28T23:19:00.008-04:00

Welcome back fair readers! There are probably only two of you, but hey there could be hundreds right? Right. So here is the skinny. We held a top level meeting amongst the head brewers of Midnight Brewing Co and concluded that it was time to start investing in some more equipment. As such, I am here to describe to you the wonders of our initial purchases and a little about why we made them.

First is a false bottom for the mash/lauter tun (5 gallon Gatorade cooler). Up until now we have been using various braided hose from Home Depot normally reserved for home plumbing like connecting water from your copper pipes to your sink or toilet. This was fairly easy (good) and cheap (better), but it had its downsides as B Brewer touched on. The polymer braid was easily crushed by the grains and was essentially ineffective. I could get into the flow dynamics of why you want even draining of wort from the grain bed for best extraction and such but that’s above my head. Needless to say we were essentially drawing wort from just one small part of the whole grain bed which is inefficient. The stainless steel braid fared somewhat better but was clogged in our Stout 3.0 brew. And so that brings us to False Bottoms.

Fortunately for all of us a genius of an entrepreneur out there came up with a solution to our problem. A pre-made false bottom that you can buy in various sizes so that it fits your particular cooler (read: mash/lauter tun). We bought ours from Mountain Homebrew. I have not run into anyone else that is using this particular false bottom so I am not sure what to expect as far as efficiency. Only one way to find out!

Next is our new 20BBL fermenter. Here you can see B brewer installing this beut on the premises. Originally listed at $6,500 we talked the guys over at North American Brewing Services down to a cool $6,000 even... Okay so that's not really B brewer and we didn't buy this fermenter but wouldn't that have made for a great blog post?

Alright, so we haven't bought anything else quite yet. We are thinking of trying to improve our immersion wort chiller to decrease the amount of time we spend cooling the wort which sits now at 30-45 minutes. We originally used 1/4" copper tubing and only about 20 feet of it too which when coiled up does not amount to much vertically. In essence the coils collect on the bottom of the kettle and since the last time I checked hot things rise and cool things sink (go science!) we end up having nice chilled wort at the bottom of the kettle but the top remains scaldingly hot for quite some time.

Two things we can do. #1 More cowbell! Basically just get some more tubing and make the whole thing longer while at the same time weaving some heavy duty copper wire between the coils so that it will stand up and not collapse on itself. #2 Switch to a larger diameter tubing. Larger diameter tubing means that there will be more surface area of the coil in contact with the hot wort and as such more heat transfer.

Both methods can be only carried so far. Problem #1 At a certain point in a long tube the cooling water will have reached the same temperature as the hot wort and so any further length of tubing that hot water has to travel is simply a waste of time/tubing/money(the worst of the three).
Problem #2 You can get a tube that is too large so that the heat transfer through the copper pipe is only to the outer diameter of the column of cooling water. Again, inefficient and a waste of resources/money (there's the M word again).

We are going to go with method #1 and invest in some more copper tubing and construct it so the height of the coils is relatively equal to the height of our normal ending boil volume. Notes later on how much we improve.

To end... I really don't have any more words for you intrepid brewers so stop reading my mindless, meandering, message and get yourself a homebrew. Cheers!

3.0 update

2008-04-13T23:54:00.000-04:00

An update on 3.0

A few days have passed and we've started getting anxious about contamination in our brew since there was no visible action on the airlock. While this was probably due to the seal being busted on the airlock we wanted to be certain. In which case we decided it would be a good idea to transfer the brew to a glass carboy. Why this makes sense I am not sure, since if the beer was going to be contaminated it probably would have been already. When I peeled off the top of the fermenter I was greeted with the delicious smells of chocolate and coffee. It was like I was opening up 5 gallons of some crazy chocolate milkshake.

Transferring the beer in a 3rd person narrative:

B Brewer, alone one afternoon took this task upon himself and transfered the fermenting beer to the 5 gallon glass carboy. Shortly after he noticed a a nice frothy head forming at the very small airspace. "Hmmmm this looks like it could be bad" he proclaimed loudly to himself while stroking his chin. Surely enough the froth head reached the airlock and showed no signs of slowing down, it was not happy about being disturbed from its nice and quiet plastic fermenter. B Brewer acted quickly, dashing into his supply closet of random brewing accessories and grabbed a discarded piece of tubing. A Perfect fit onto the airlock, now what do to do with this 5 gallons of frothing beer? Time was running out as the train of bubbles was quickly reaching the end of the newly minted blow off hose. Frantically B Brewer threw off all of items from the bathroom counter and onto his bed. And placed the carboy of angry liquid on the bathroom sink counter and taped down the blow off hose into the drain. After a few hours B Brewer decided that this plan was no good, do to the large volume of delicious smelling froth being lost down the drain. Alas the beer was tamed and transfered back to its preferred home. But not before B Brewer could document this phenomena.

Stout 3.0

2008-04-08T19:56:00.004-04:00

After a long period of mourning, and a proper send off for our IPA we returned to our equipment with a new resolve.

What better to replace our lost IPA than a nice dark stout, just in time for Spring! Everyone loves dark beer on a warm day!

Here at Midnight brewing we have a tendency to be a little off with the dates and brewing schedules. About the only beer that we timed correctly was our Pumpkin Ale. Our Belgian was in the late fall, Our Holiday ale was brewed mid December...

But lets get to the 3.0,

Due to requests from a certain connoisseur of our stout, we decided to up the roasted barley and chocolate malts in this version. Version 2.0 was good after sufficient lagering, but was lacking the complex flavors that we achieved from version 1.0 which was an extract brew.

And another installment of Lessons learned:

All started off well, we struck early and even got the mash off to a good start. Until the dreaded stuck run off. We have been referring to stout since our first all grain batch as "the cursed beer". You may say "Oh dark beer, no problems there". Sure, its forgiving in the flavor department, but since we moved to all grain we have had no luck with our lautering and stout. See Stout 2.0

A little history of our mash tun; we set out to design a mash tun that resembled "El Cheapo Mash Tun"
Short Story: We bought the wrong kind of braid, the plastic polymer kind, not the stainless steel. We thought it might have been a little too easy to cut (ok so our trips to the hardware store aren't always that fruitful or relaxing).

Anyways, my cousin a veteran homebrewer gave me a piece of the stainless steel braid at Easter that he used in his mash tun. Awesome right? I agree. Multiple homebrewers in the same family!

But the awesomeness ends there as we decided that we wanted a quick brew session and that we should wait to modify the mash tun until after this brew...

Well after 5 or so mashes, the polymer braid that we had been using was completely crushed, which left us with a runoff worse than an old man with an enlarged prostate.

A few of the solutions that we tried:

Blowing up the hose: Not recommended, can easily burst blood vessels and blow who knows what into your delicious mash. Succeeded in getting the flow to pick up briefly, but quickly stopped again. A Brewer laughed hysterically at this one as I must of looked like I was doing some kind of crazy imitation of Dizzy Gillespie

Remove braid and hope for best: Not recommended either, results in large volume of wort everywhere and a slight "deck" taste to your finished beer.

Ultimately we poured the mash into our fermenter temporarily and installed the new braid. Which of course worked perfectly.

Lesson learned: If you got an equipment upgrade, use it right away.

Brew School?

2008-03-15T00:52:00.003-04:00

Thought about getting a professional education in commercial brewing? I found this blog of a brewer attending the program offered by Versuchs- und Lehranstalt für Brauerei in Berlin (VLB). I haven't read much of it myself but the gist of it is that he is a brewer that is blogging from Berlin about the program and his experiences there. Worth checking out if it's something you have thought about doing yourself.

Midnight's First (But Not Last) IPA

2008-03-14T23:56:00.007-04:00

Well faithful readers (all two of you) it has been awhile and for that we apologize. But the wait is over and a new post is come. I bring you a tale. A tale filled with adventure, mystery, intrigue and disaster. Okay maybe not the first three so much as that last one but hey if it reels you in, it reels you in.

So several weeks ago, back in ye olden times of February, we set out to brew the IPA I prattled on about. It was going to be marvelous. As expected the local brew shop did NOT have a good selection of hops AND they had jacked up the price. Well not to be put of we forged ahead and chose an assortment of hops, some of which we had never worked with before, much less heard of. Let me lay it out for you:

Base malt of 2-row barley (naturally)

Vienna malt

Cara-pils to add a little body

As for the hops this is where it gets wild and crazy:

Mt Hood pellets 4.2% AA

Chinook pellets 11.2% AA

UK Phoenix pellets 10% AA

Saaz whole leaf 2.5% AA

Kent Goldings whole leaf 5% AA

SG:1.056 (corrected)

The SG was somewhat higher than anticipated. Normally we do not have the best efficiency in the world and so overload on the grain a bit. Apparently our efficiency has improved. In any case by the end of the boil our brewery (read: the back deck) smelled overwhelmingly hoppy. We were on the right track to IPAdome.

Now this is where the "adventure" begins. It turns out that a member of the Midnight Brewing team who shall remain unnamed (not me) neglected to bring the sink adapter for our wort chiller. Normally not such a big deal but we were on a tight schedule. Places to be, beers to drink, the usual. So instead of the usual cooling of the wort and pitching of the yeast we decided to risk letting it cool on its own in the fermenter and ask our kind and gracious... brewery landlord/adjunct-assistant-junior-brewer-in-training/Allison pitch the yeast in the morning.

At this point I bet you are thinking: "Where's the adventure? Your fermenter will be sealed even if it cools slowly it should be at least somewhat aseptic. Sounds more like a tale of laziness than intrigue." Fear not fair reader for there is still more. So not only was the yeast going to be pitched in the morning but we noticed that the gasket on our fermenter lid that the airlock passes through was torn. So there was a small, ever so small opening through which potentially contaminating wild yeast and bacteria could move and get at our cooling wort. But hey, we are adventurous so why not forge ahead. It gets better. The yeast we were going to use (from Wyeast Laboratories in one of those convenient smack to activate pouches) had been activated say... a month ago... or two... give or take a month.

So there you have it... adventure and definitely mystery. Would this actually work? Shall I skip ahead? Well the short answer is no. Of course not. This is a tale of mystery, intrigue and disaster. So a week and a half later we set about bottling. The bottles had all been cleaned and sanitized, labels were removed (Thank you brillo pad) and caps were ready. First we made the transfer from our fermenter to our bottling bucket. That's when you could smell the first hints of disaster. Something was off. It smelled hoppy but only a little bit. It seemed more muted than it should have been. There was something else there covering it up like that layer of dust that covers our brewing books on how not to screw up a brew. Not only that but it was far cloudier than it should have been. So we decided to have a little taste before bottling just to be sure all was well with Midnight Brewing Co's first IPA.

Normally this is where I would go on and on about how good it tastes. No. No, not this time. Tell me, have you ever licked the wall of a basement? Or maybe just chewed on some wet cardboard. Perhaps both in one sitting? If not then you can't quite fully understand the flavors we were getting. It was heinous. I mean it was bad. Not only that but the taste didn't really seem to want to go away. No, no it would rather chill on your taste buds letting you enjoy the rankness for as loooong as possible. I will have nightmares about this one. So long story short it was a tragedy. The whole batch went down... the... drain. Tears ensued, albeit manly ones. The Midnight Brewing flag was lowered to half staff.

The first Midnight IPA has joined the ranks of such brews as the Raspberry Wheat and the Scotch Ale. Though I think this one definitely tops the list of Midnight's catastrophic brews since it was utterly undrinkable by anyone (for some bizarre reason that totally escapes us there are some people out there who love the raspberry wheat AND the Scotch Ale).

Lessons learned: Don't cut corners. Do what must be done. There is nothing like investing so much time into a brew and watching it swirl down the drain like so much Budweiser. We are going to repair the fermenter gasket and someone is going to pin a note to their chest from now on reminding them not to forget the sink adapter. Oh and I will remember to buy fresh yeast this time (yeah that was my bad).

Until next time readers, grab a homebrew and raise it in silence as testament to this failure.

Conversion to all-grain

2008-01-22T17:42:00.000-05:00

Back in September Midnight Brewing took the plunge and converted to all-grain. Behold the trials and tribulations of rapid brewery expansion!

What to Brew Next?

2008-01-12T13:33:00.000-05:00

Ah the eternal question facing every brewer. "So I have this beer and it's great but what do I make now?" Well I have a beer (Belgian at the moment) and I have little idea of what to do next.

So we were pondering this question and came upon the idea of making a really intense IPA along the lines of an Imperial. Two reasons for this: #1 One of our tasters is always commenting (read: complaining) about how our beers are a mouthful and she likes really hoppier beers. Okay, so some recent brews have been a bit thicker I'll admit, but that is because of the maltiness that we get and maybe a bit of over zealousness with some oats... And #2 Hop shortage. We all know about it. We have all read article after article on the subject. We all know it's here and so I won't go into it.

In any case, what with this business of hops being scarce the thinking was, wouldn't it be nice to have one last big hurrah before we have to start making modifications to our other recipes to cope with the loss of our usual hops (Ingenuity and creativity be damned!)? Well it would be nice. So with that in mind B brewer paid a visit to our local homebrew shop and lo and behold the shop is essentially out of hops. Out, empty, gone, devoid of hops, there is a hop vacancy, the lights are on but no hops are home, need I go on?

Staff teleconference time to discuss the problem. B Brewer suggest we bitter with what Anheuser-Busch uses... urine. Okay sorry cheap shot (though true perhaps? I once heard a craft brewer say his favorite beer is Budweiser because every time he drinks one it makes even his worst beer taste better). I had no suggestions. Teleconference over.

Maybe we could just throw in the mish mash of obscure hops they have left. We could call it... Hop Medley, Hop Melange, Hoppodge, Hop Jumble (can you tell I just visited Thesaurus.com?).

Well readers, we now have a plan. IPA. Ordinarily this brew would be happening today but B brewer has a group meeting for class and I am sick with one bastard of a cold. So this brew will happen likely this week late at night or next weekend. Stay tuned for the results.

Merry Christmas!

2007-12-25T12:19:00.000-05:00

Merry Christmas everyone! Have yourself a Holiday Beer!

Why Blog?

2007-12-24T19:21:00.001-05:00

So as I sit here on my flight to Atlanta (Cheers Monday Night Brewing!) I have been pondering the whole purpose of this blog. Why do we do it? This has come up in conversation amongst the brewing staff (all two of us, staff meeting are always hectic). My first thought was that I blog because I want to share what we are doing with everyone else. But let’s face it, for all the writing that goes up on this blog there are not millions of fans flocking to the site. I think then our purpose is primarily entertainment of sorts with a bit of education thrown into the mix.

Most people that would read this blog can be divided into two groups. One group is made up of the people that are just starting to get into homebrewing themselves and they are looking for more information on how it’s done. This is what I did and I imagine it’s what many people do. The internet is such a wonderful resource, making the details of homebrewing much more accessible to everyone. Case in point, we got a hit on the blog from someone who was searching Google using the terms “brew kettle” and “garbage can.” Now I don’t know if this is good or bad but apparently Google thinks highly of us when you search for homebrewing and garbage…. Seriously. I think it’s because I described garbage in the kitchen in one post. I certainly don’t think our beer is garbage, with the exception of the raspberry wheat. Now to you, the intrepid up and coming homebrewer out there trying to turn a garbage can into a brew kettle let me say this, don’t. Please. That’s just gross. Sure you may buy it new (thus hopefully relatively clean) and you are saving money on a better brew pot but seriously, why? Invest a little more money in some quality and in the long term it pays off. I would suggest the turkey fryer readily available from Home Depot.

The second group of people reading this I see as fellow brewers. I read several other blogs myself. It’s a great way to learn more about techniques other brewers are using but learning aside I think it’s just fun. I enjoy reading about the trials and tribulations of the Monday Night Brewers and Beaux’s. I don’t really know how I could put it any better.

That first group of people, the learners, raises another interesting point. Recipes. When we were first starting out brewing with our almost exclusively extract based brew how did we find a recipe? On the web of course. There are many, many sites out there with recipes for all different styles of beers. As it was those recipes posted online that got us our start should we in turn post our recipes? On the one hand it is nice to call a brew your own, a unique beer that only you know how to make. I would call this the “real brewery” perspective in the sense that it is the actual breweries that consider their recipes to be proprietary. On the other hand without the freely available information online we would have had a much more difficult time learning the process of brewing and eventually coming to a point where we could formulate our own recipes. This spirit of sharing information is true of most hobbyists and homebrewers are no exception. So what should we do?

On this question B brewer raised another good point. Although it would be nice to share our brew recipes with others, what happens when someone takes a recipe that we have not really perfected (I bring you back to the train wreck of a disaster that is known as the Midnight Brewing Raspberry Wheat), brews it and then discovers they have wasted their time brewing something that tastes like a mix of under ripe raspberries and windex? Clearly that reader would never come back to us for information or advice.

So I am back where I started on this question. Post recipes or not? We’ll decide in the next staff meeting.

Christmas is coming, have you gotten dad a gift yet? Perhaps you should consider an intro homebrewing kit! Cheers and don’t forget to drink a homebrew now as a reward for slogging through more of my meandering thoughts!

Bottling the Spiced Christmas Ale (Finally!)

2007-12-24T19:12:00.001-05:00

So it has been some time since either of us made a post to the blog. Apologies all around but B Brewer has had finals and vacation time and A Brewer… Well I really have no excuse other than rampant laziness as of late.

In any case, we bottled the Christmas Spiced Ale/Holiday Spiced Ale last weekend (Dec 15th). Now if you are reading this blog reverently, which I imagine you are, then you would most likely notice that that was almost a month after we brewed the beer to begin with. If you are a brewer yourself you are probably thinking something like “Ah they must have been racking every week or so and just letting the beer condition in fresh new carboys to enhance all the flavors.” Or if you are not a brewer you might be thinking “I have no idea what this guy is talking about, he sounds lazy to me, and I just like reading bout beer.” Okay well truth be told the non-brewer is closer to the truth. We just never got around to racking. No, no, not even once. The beer sat on the lees for almost a whole month! Well nothing to be done about it now and in some cases beer is intentionally left on the les for extended periods of time. I would leave you with an example of such a brew from teh interwebs but I am actually on a plane right now flying home to Redmond, Washington so that’s out of the question.

So we bottled. And as always we took some hydrometer readings and through some complex calculations we determined that we had a potential alcohol of about 8%. This is what I was aiming for so I was very satisfied. If you read the post about when we brewed our goals were twofold for a seasonal winter holiday beer: Higher alcohol content than your standard ales, and a complex spiciness. More on both of these with the tasting notes later. We got slightly more than two cases worth of your standard beer bottles with 53 bottles. Oh and on the note of bottles, I can tell you that Saranac labels are still the bane of our bottling lives. I have never found a label more unwilling to come off of a bottle… ever. We use the most abrasive scrubbing pads we can find and after much scouring we can get the paper of the label off but are left with this gummy sticky residue from the glue that, try as we might, goes nowhere. (I try to give all those to either B brewer or someone else…)

Alright so bottling was finished, the caps were marked with a C for Spiced Christmas ale or something along those lines and the kitchen was cleaned. As usual we dumped the muck left on the bottom of the fermenter outside in the snow. So usually I have very little patience and I end up opening a bottle 4 to 5 days after bottling. I know, I know, its not enough time to let some of the more bitter flavors settle down and get that complexity that ends up shining through but I can’t help it. When you put so much blood, sweat and tears into a brew (where do you think the “complexity of flavor” comes from? Kidding) you can’t help but want to reap the fruits of your labor.

So I opened up a chilled bottle last night and poured myself a glass. The aroma was absolutely amazing. All of the spices were there. It was like no beer I had ever smelled and the color was dark on the level of a porter. Tasting. Delicious. I know I say that every time but it’s true. You can definitely get the flavor that you would expect from a darker beer with hints of maltiness and it was slightly thick, along the lines of skim milk. Thicker than water, lighter than cream. The cacophony of spices is amazing. I can’t say that I could pick out any one spice that really dominated over the rest. They all blended together into a symphony of flavor. The taste lived up to all of the expectations I had built up from the aroma. Then there is the alcohol content. I have definitely had beers that have high alcohol content that dominates the beer, something that to me is undesirable. It’s the whole idea of say painting a picture and using only one color. Sure you get yourself a painting but it isn’t particularly involved or exciting. So at 8% our beer is strong enough that it gives you a warm feeling as it goes down your throat, as it should for a winter beer, but it is not so strong that it overwhelms any of the other flavors and complexities. In a word, balance.

So there you have it. Those are my impressions of our first attempt at a spiced beer using a recipe exclusively of our own formulation. Perhaps B brewer will be by later to leave his thoughts. In any case now that you have slogged through my meandering thoughts you are likely parched. So go to the fridge and get yourself a homebrew!

Branding pt 1

2007-11-22T10:55:00.000-05:00

So with some downtime we are trying to refine what we want the "look" of the brewery to be. What we want is to develop not just an image we can slap on some glasses but an overall theme that will be tie together all of the logos, bottle labels, tap handles and the format of the blog. I guess we are trying to develop some of the brand of the brewery.

The brand of the brewery encompasses not only the physical aspects such as the iconography I mentioned above but also the more conceptual aspects of what your brewery represents. That is, from a conceptual standpoint, what ideas and feelings do you want your consumers to associate with your brewery and your products. When I think of a microbrewery, (or in our case maybe nano-brewery...) I am already thinking that it is different from the major brands like Anheuser-Busch. It's the "little guy." By drinking their beer I am saying that I am different than the Joe six packs of America who probably won't ever pick up anything but a Bud. Picking up from that easy branding start, we need to develop further to identify ourselves in the growing sea of small breweries. What sets us apart making us different and memorable to the consumer? Are we the quirky brewery like Magic Hat? Are we the traditional Belgian style brewery like Ommegang (a personal favorite of mine)?

To be honest I really have little to no idea what I am talking about (does it show?) but these are my amateur impressions of branding from what reading I have done and what I think of when I ponder the subject. I think a good example of a developing brand can be seen in the guys over at Monday Night Brewery. We don't even have names for our beers much less labels like these guys do. They are doing what we at Midnight Brewing can only dream of doing and taking forward their ambitions of becoming a brewery serving up delicious beer to all. In any case, more thoughts on the subject of branding and maybe a taste of what we come up with to come later.

HAPPY THANKSGIVING to all! Be sure to crack open some homebrew with the turkey and mashed potatoes.

B Brewers take on Holiday Ale

2007-11-20T22:22:00.000-05:00

To fill in the blanks of A Brewers memory, the mystery spice was ground cloves. Which, I hope we removed most of when we strained the chilled wort....

Now my formulation of this recipe was based on some experimentation with brewing a spiced tea(which I read was a recommended/necessary step in designing a spice formulation) Going into this with a confident attitude I thought that the Cardamom would give the strongest flavor and might overpower all the other flavors...being a fan of Chai, I though eh what the heck, it will probably be tolerable...so I added quite a bit of cardamom and an equal amount of cloves, cinnamon and a little all spice for good measure. Boy did I ever learn about cloves. You really come to know a spice when it invades everything you eat for the next day...

Needless to say I was careful with the amount of cloves in the "secret" spice formula :-)

Every time we brew I feel like we learn something new.

Lessons learned this time:

1) The hose carrying the wort out of the mash/lauter tun should be properly secured, if it does not stay in the collecting container, "Hey quick question..." is not an acceptable response to seeing delicious wort emptying out on the deck.

2) Throwing hops into boiling wort on high heat = massive boil over and recipe modification.

3) If you are filling up the fermenter with sanitizing solution with the water exiting the wort chiller, you should not leave the room.

A 48 hour update: Vigorous activity on the airlock

Brewing the Spiced Christmas Ale

2007-11-19T23:58:00.000-05:00

Yesterday was brew day for our spiced Christmas ale. Just like every other beer of ours we don't really have a name for it other than the descriptor of what type of beer it is. Suggestions anyone? (Does anyone really read this?) This was B Brewer's recipe and was based on the very first beer we ever brewed, a fitting tribute as it was this time one year ago that we first started brewing. That first beer was a Red Ale (also nameless) that I wasn't really too fond of until about a month after it had been bottled. This was the first homebrewing lesson in patience though personally I still haven't taken it to heart.

Originally the Red Ale was a mixture of extract and grain, with a complete mess of the kitchen made in what could maybe be described as a mash using a grain bag. Oh the memories. It was then that we used a rolling pin and a cutting board to try to crush our meager few pounds of grain for the mash. In fact the background of the banner is from that attempt. Do you have any idea how long it takes to crush even a few pounds of barley with such a setup? Think hours. Grueling grueling hours. That was the experience that made us invest in a grain grinder (The Barley Crusher which I swear by) which has saved countless hours of frustration, especially when we transitioned to all grain several beers down the road.

In any case, the base malt for this batch was 2 row pale malt combined with roasted barley, and dark crystal malt (I think, I don't have the recipe in front of me) for the specialty grains. We also held some dry malt extract (DME) in reserve for the boil in order to really bring up the potential alcohol. Of course a spiced ale is nothing without spices. We used a combination of cinnamon, nutmeg, orange peel, cardamom and something else that I just can't quite remember (will update later). For hops we used Northern Brewer (pellet), Cascade (whole) and Willamette (pellet). Originally Willamette wasn't going to be in there but apparently we were overdue for a boilover because as soon as I added the first Northern Brewer our kettle immediately frothed furiously and boiled all over the deck taking a lot of the hops with it. Some could say this was an amateur mistake and I should have paid closer attention as the person adding the hops but I would rather say shouldn't someone have been watching me watch the boil... So the Willamette hops were added to account for this act of god that removed our other hops from the boil and we moved on. Since the goal was to get not just the flavor of the spices but also that powerful aroma, and what an aroma it was, half of the spices were added at 15 minutes to the end of the boil and the rest were added at 5 minutes.

Cooling took us about an hour with the wort chiller running. I think we can get better cooling if we can keep the coils from bunching up in the kettle. At the moment even if we spread out the coils before immersing them in the kettle, in the end they all end up settling in a bunch at the bottom. We are going to try using some heavy duty copper wire to weave in and out of the coils vertically to try and keep them spread out more. With all of the coils bunched at the bottom a half hour of running cold water through cools the bottom of the kettle so it is safe to touch but the middle and top are still too hot.

We took a reading just before pitching our yeast and the result was a SG of 1.092. Too high you say? Well lets hope it ends up at that high holiday beer level that warms you up but not so high that you can't taste the spices. Going to take a reading next weekend and then rack it and let it sit for another week or so. So check back later but in the meantime you too should be drinking a homebrew.

Tasting the Belgian

2007-11-16T09:26:00.001-05:00

So last night was the moment of truth. I couldn't wait any longer so I threw two bottles of the Belgian into the fridge. Granted it had only been four days since bottling, far too short a time to get a good idea of the quality of the beer, but I was impatient to see some results from our new recipe. There wasn't much head from the beer, whether that was because our fridge was too cold or just because it had only been carbonating for four days I have no idea. It was a bit on the dark side for a Belgian, closer to the color of a pale ale. Holding it up to the light it was extremely cloudy, a sure sign of a thick beer. Perhaps adding oats wasn't the best idea... In any case it tasted delicious. There was the classic underpinnings of the coriander with a slightly acidic tartness. I could definitely taste the orange AND that bitter orange peel flavor that was there when we bottled had gone away. In a word, Delicious (If I had any command of the english language I would put another word there so I stop describing it as delicious but I don't and I am too lazy to pick up a thesaurus). To get an unbiased opinion I gave a sample to my neighbor (lover of keystone... perhaps not so unbiased) and she called it a mouthful so perhaps in the future less oats (only used a half pound).
Anyway my kitchen is now stacked with cases of homebrew adding to the rich atmosphere of unwashed dishes and overflowing garbage can. The roomates are starting to get restless with the abundance of beer in the corner but hey, relax, have a homebrew.

Go Blog Go

2007-11-07T13:03:00.000-05:00

Aaaaand Midnight Brewing Co. blog is online.